Xerox 6100 - Handbuch (Seite 139)

Status and Service
Messages
Printer Jams and Troubleshooting 6-19
Service Messages
This service message... Means...
CALL FOR SERVICE C3 NVRAM ERROR An error has been detected with the
item indicated in the service
message. Correction of these errors
is performed by qualified
MINOLTA-QMS service personnel
only. Contact your MINOLTA-QMS
vendor.
» Note: A service message
sometimes occurs as a result of
an unusual combination of
events, not because of an actual
problem. When the printer stops
and a service message displays
in the message window, turn the
printer off and then back on. This
often clears the service message
indicator, and printer operation
resumes. Always try this before
making a service call.
Service calls should be placed to the
vendor from whom you purchased the
printer. If you cannot get service from
your vendor, see the
Service &
Support Guide for more information.
CALL FOR SERVICE C4 ENG CTRLR HW
CALL FOR SERVICE C7 TIMING CLOCK
CALL FOR SERVICE D1 Y CLUTCH
CALL FOR SERVICE D2 M CLUTCH
CALL FOR SERVICE D3 C CLUTCH
CALL FOR SERVICE D4 K CLUTCH
CALL FOR SERVICE D5 YK SOLND
CALL FOR SERVICE D6 MC SOLND
CALL FOR SERVICE E1 DEVLPR MOTOR
CALL FOR SERVICE E2 MAIN MOTOR
CALL FOR SERVICE E3 DRUM ERROR
CALL FOR SERVICE E4 TONER SENSOR
CALL FOR SERVICE E5 ROLLER SOLND
CALL FOR SERVICE E6 CLEAN SOLND
CALL FOR SERVICE E7 CLEAN CLUTCH
CALL FOR SERVICE E8 FUSER CLUTCH
CALL FOR SERVICE E9 BELT MARKER
CALL FOR SERVICE EL ERASE LED
CALL FOR SERVICE F0 COOLING FAN
CALL FOR SERVICE F2 OZONE FAN