Zanussi ZOB 460 - Handbuch (Seite 24)

24
Safety Thermostat
To prevent dangerous overheating (through incorrect
use of the appliance or defective components), the oven
is fitted with a safety thermostat, which interrupts the
power supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error after
the oven has cooled down; if on the other hand, the
thermostat triggers because of a defective component,
please contact Customer Service.
Controls
Push-Pull control knobs
Some models are provided with push-pull control knobs.
These knobs can be completely sunken inside the control
panel when the oven is not working.
Oven Function Control Knob
0
The oven is off.
Conventional cooking - The heat comes from both
the top and bottom element, ensuring even heating
inside the oven.
Top heating element - The heat comes from the top
of the oven only.
Bottom heating element - The heat comes from the
bottom of the oven only.
Grill - The grill element will be on.
Fan cooking - This allows you to roast or roast
and bake simoultaneously using any shelf, without
flavour transference.
Defrost setting - This setting is intended to assist in
thawing of frozen food.
Mains on Indicator
The mains on light will come on when the oven
function control knob is set.
Thermostat Control Knob
Turn the thermostat control knob anti-clockwise to
select temperatures between 50°C and 250°C.
Thermostat Control Indicator
The thermostat control indicator will come on when the
thermostat control knob is turned. The indicator will remain
on until the correct temperature is reached. It will then cycle
on and off to show the temperature is being maintained.
0