AEG S83800CTM0 - Handbuch (Seite 48)

REAR SPACERS
2
4
3
1
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
LEVELLING
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
REMOVING THE SHELF HOLDERS
A
B
C
Your appliance is equipped with shelf re-
tainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direc-
tion of the arrow (A).
2. Raise the shelf from the rear and push
it forward until it is freed (B).
3. Remove the retainers (C).
48 www.aeg.com