Zanussi ZWH6140P - Handbuch (Seite 23)

• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a stiff
brush.
• Screw the hose back onto the tap. Make
sure the connection is tight.
• Unscrew the hose
from the appliance.
Keep a towel near-
by because some
water may flow.
• Clean the filter in
the valve with a
stiff brush or with
the piece of cloth.
• Screw the hose back to the appliance and
make sure the connection is tight.
• Turn on the water tap.
What to do if…
The appliance does not start or stops during
operation. Certain problems are due to lack of
simple maintenance or oversights, which can
be solved with the help of the indications de-
scribed in the charts, without calling out an en-
gineer. During appliance operation it is possible that
the red pilot light of the button 7 flashes and
one of the indicator pilot lights illuminates to in-
dicate that the appliance is not working.
Before contacting your local Service Centre,
please carry out the checks listed below.
Fault code and mal-
function Possible cause / Solution
Einde
Fin
Extra spoelen
Rinçage plus
e z u a P / t r a t S
e s u a P / t r a p é D
Hoofdwas
Lavage
The light of button 7
flashes and the light
6.1 illuminates:
Problem with the wa-
ter supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters (read "Cleaning the water inlet filters"
for more details).
23
www.zanussi.com