Technical data, Installation, Replacing the lamp – AEG SCS91800F0 Benutzerhandbuch

Seite 19: Closing the door, Positioning

Advertising
background image

Problem

Possible cause

Solution

dEMo appears on the Dis-

play.

The appliance is in demonstra-

tion mode (dEMo).

Keep pressed approximately 10

sec. the OK button since a long

sound of buzzer is heard and the

Display shut off for a short while:

appliance start works regularly.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Service Center

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess

Height

1780 mm

Width

560 mm

Depth

550 mm

Rising Time

24 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

Technical data

19

Advertising