AEG S51800DSW0 - Handbuch (Seite 19)

8. Screw the pin back on the other side.
9. Fit the doors into the pins and install
the doors. Install the hinge.
10. On the opposite site, install the hole
covers.
11. Tighten the hinge. Make sure that the
doors are aligned.
12. Remove and install the handle 5)
on the
opposite side.
13. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
3
2
1
5) If foreseen
Installation 19