Technical information, Electronic adjustment – AEG F54030VI0 Benutzerhandbuch

Seite 32

Advertising
background image

• The quality of the detergent can be

the cause.

Dishes are wet
• The programme is without a drying

phase or with a low temperature dry-
ing phase.

• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the

cause.

• The quality of the combi detergent

tablets can be the cause. Try a differ-
ent brand or activate the rinse aid dis-
penser and use rinse aid together with
the combi detergent tablets.

Refer to ‘HINTS AND TIPS’ for
other possible causes.

Electronic adjustment

1. Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode. Refer to
‘SETTING AND STARTING A PRO-
GRAMME’.

2. Press and hold function buttons (B)

and (C) at the same time until the in-

dicators of function buttons (A), (B)
and (C) start to flash.

3. Press function button (A).

• The indicators of function buttons

(B) and (C) go off.

• The indicator of function button (A)

continues to flash.

• Intermittent acoustic signals oper-

ate and the end indicator flashes
showing the current setting of the
water softener.
– The number of flashes of the

end indicator and the number of
the acoustic signals show the
level of the water softener.
E.g. 5 acoustic signals and 5
flashes + pause + 5 acoustic sig-
nals and 5 flashes = level 5.

4. Press function button (A) again and

again to change the setting. Each
time you press function button (A)
you go to the next level.

5. Deactivate the appliance to confirm

the setting.

11. TECHNICAL INFORMATION

Dimensions

Width / Height / Depth
(mm)

596 / 818 - 898 / 555

Electrical connection

Refer to the rating plate.

Voltage

220-240 V

Frequency

50 Hz

Water supply pressure

Min. / max. (bar / MPa)

(0.5 / 0.05 ) / (8 / 0.8 )

Water supply

1)

Cold water or hot water

2)

max. 60 °C

Capacity

Place settings

12

Power consumption

Left-on mode

0.99 W

Off-mode

0.10 W

1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian

energy), use the hot water supply to decrease energy consumption.

32 www.aeg.com

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: