Xoro HTC 1927D - Handbuch (Seite 80)

18 HTC 1927D
Engl
ish
Connection
Power connection
Connect the AC/DC power adapter with the power input of
the HTC 1927D TV set. After than, please connect the
power cable with the wall mounted power outlet.
On the front side you can see a red LED light. The TV set
is now in Stand-By mode. By pressing the POWER button
on the remote control or on the top side of the device the
red LED changes to a green light.
Antenna
The HTC TV set has an analogue and a digital TV Tuner inside. For re-
ceiving analogue TV signals please connect the antenna cable with the RF
connector on the HTC TV set and with the VHF/UHF roof antenna or with a
CATV antenna plug.
For receiving digital terrestrial TV signals please connect the HTC TV set
with the RF plug and also with the roof antenna. If no roof antenna is avail-
able, please use indoor aerial.
For activating the analogue TV Tuner, please switch with the SOURCE
button and choose in the popup window „ATV“ or “DTV“ for digital terrestrial TV.
Note:
For getting the best DVB-T reception please uses the roof antenna. If not possible, than you
can connect the HTC TV set with an active indoor aerial.
SCART Input
Audio– and Video signals from a VCR or a setop box can
be transmitted by SCART. Please connect a SCART
cable with the SCART input on the HTC TV set and with
the SCART output on the VCR or setop box.
Press the SOURCE button and choose „SCART“ in the
popup window and the SCART interface is activated.
HDMI
If you want connect a multimedia device with HDMI like a
game console „PS3“ or a Setop box with the HTC TV set,
you can establish a HDMI connection. Please connect
the HDMI cable on the HDMI interface on the HTC TV set
and the HDMI output of the multimedia device.
Please press the SOURCE button and choose
„HDMI“ in the popup window and the HDMI input is
active.