Beko CS 234020 DS - Handbuch (Seite 15)

GB
Instruction for use
9
Cleaning the water tank
Remove the water tank, open the latches on both sides
and detach the top cover mechanism from the water tank.
Clean the water tank with warm clean water, reinstall the
top cover mechanism and fasten the latches.
When installing the water tank, make sure that hooks
behind it fits securely into the hangers on the door. Make
sure that parts removed during cleaning (if any) are
installed correctly into their original locations.
Otherwise, water may leak.
Important:
Water tank and components of water dispenser are not
dishwasher-proof.
The follow ing information is valid only for the
water dispensers endow ed w ith loc k
You may use the lock in order to avoid small children
tampering with the water dispenser. To do this, slide the
locking latch from left to right as illustrated in the figure.
You must slide the latch back to left position in order to
use the water dispenser.
Water tray
Water that drips while using the water dispenser
accumulates in the drip tray. Remove the drip tray by
pulling it towards yourself and empty it from time to time.
Remove the plastic drainer part as shown in the diagram
by pressing down on the edge.
Remove the water valve from the water tank as shown in
the diagram. When re-fitting, make sure the O-shaped
seal is in place.