ANKER Screen Protectors - Handbuch (Seite 4)

3
Step 3: Partially remove Disposable Layer
1 from one end – do not remove the entire
layer at once. Be careful not to touch the
Protective Film’s adhesive.
Step 4: Align the film with the four corners
of your screen. Then, slowly lower the
Protective Film onto the screen. As it
adheres in the desired alignment, start to
remove the rest of Disposable Layer 1 and
install the remaining end.
Step 5: If you find dust, use the dust-removal
sticker to eliminate. If bubbles appear, either
use the dust-removal sticker to remove and
lower again. Or press them out with the
provided bubble removal card.
Step 6: After making sure the Protective
Film is securely adhered to your screen,
slowly and carefully remove the remaining
Disposable Layer 2, and wipe the screen
with the microfiber cloth.