WolfVision VZ-3 User Manual - Handbuch (Seite 12)

11
WARNING:
Never use strong cleaning agents such as acetone or benzene!
Never use cleaning agents to clean the light!
These substances can damage the surface and the anti-reflex coating!
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Light: Clean the light by gently wiping with a soft micro fiber cloth only.
Lens: Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by
breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special
optical cleaner only!).
MAINTENANCE
The firmware (software) of your Visualizer (including the o ) can easily be upgraded to the
latest version. The firmware update can be done via USB or Ethernet (LAN).
Firmware update files can be downloaded free of charge at www.wolfvision.com/support.
Alternatively, the firmware update can be started in the on-screen menu (Advanced Settings / Device Info),
provided the Visualizer is connected to the Internet and a nameserver IP address is assigned (Advanced
Settings / Ethernet Settings). By selecting the line ”Check For FW Update”, the Visualizer checks the
WolfVision server for newer firmware files. Follow the on-screen instructions to start the update process.
n-screen HELP
Firmware Upgrades
Dimensions
working position: closed:
Technical Specifications are Subject to Change!
305mm
[12"]
559mm
[22"]
128.6mm
[5.1"]
488mm
[19.2"]
305mm
[12"]
506mm
[20"]
Cable Shield
When the cables are guided through the table, the cable shield can be mounted. Just connect all desired
cables, fold the unit, remove the cover and mount the shield with the two supplied screws K22x10 (Torx6).