WolfVision VZ-P38 User Manual - Handbuch (Seite 22)

For regular use of the WolfVision Visualizer, it is not necessary to go into the Visualizer's menu and change
settings. Inexperienced users should not make any adjustments here.
To enter the on-screen menu tap the MENU icon. Settings of the Visualizer's basic functions and the built-in
camera can be made here using the NAVIGATION / SELECT / CONFIRM icons.
If more information on a function in the on-screen menu is required, set the cursor in the respective line and
tap the HELP icon. A detailed description of this function appears on the screen. If you want to reset the
selected item to the default setting, keep the HELP icon pressed for 2 seconds.
By keeping the MENU icon pressed for 4 seconds the Extra Menu appears.
In the Extra Menu, settings like baud rate can be changed.
The functions of the on-screen menu are not described in detail in this user manual as the help menu is an
integrated part of the Visualizer's software (firmware). The information you see on your screen always
belongs to the current Visualizer firmware.
The Visualizer supports a special standby mode to minimize power consumption. In the "Power Control"
submenu of the on-screen menu you can activate the Deep-Power-Down Mode.
Please note, use the POWER key (#3) to wake up the Visualizer, which was set into Deep-Power-Down
Mode (the boot procedure takes more time as in the default standby mode).
All settings in the on-screen menu can be set back to the factory defaults. "Recall Factory Settings" is one
item in the on-screen menu.
If you only want to reset the item that is currently selected to the default setting, keep the HELP icon pressed
for 2 seconds!
The following chapter is for experienced users only:
ON-SCREEN MENU / ON-SCREEN HELP
Changing the Color Settings
Deep-Power-Down Mode
RESET OF ON-SCREEN MENU SETTINGS
In the "Preset Settings" the Preset icons can be assigned specific functions such as "Negative/Blue",
Black/White", "LIGHT" etc.
Preset Settings
If the picture on your screen appears to be too light or too dark or the color saturation is not correct, you can
change the Color Mode in the on-screen menu (Color Settings). Pre-settings are PRESENTATION (higher
color saturation), NATURAL (sRGB) and VIDEO CONF (for video conferencing systems).
Alternative Gamma and Saturation can be changed manually.
The output image of the Visualizers can be switched from positive to negative in the on-screen menu. In
addition, the background of a negative image can be switched to blue for better readability of text. You can
also switch between color or black and white in the on-screen menu.
TIP: If you often switch to negative, negative/blue or black/white images you can assign this function to one
of the Preset keys in the on-screen menu.
Switching to Negative, Negative/Blue and Black/White
20
In the "Power Control" submenu of the on-screen menu you can select that the Visualizer will be
automatically switched off after a certain amount of time of inactivity.
Auto Power-off
Open „Device Info” in the sub menu „Advanced Settings” to view details of the unit.
Device information und Firmware version