WolfVision VZ-P38 Control Panel - Handbuch (Seite 3)

*PRESENTATION screen - manage an on-going Presentation (slide show)
Navigate to this screen by starting a Presentation from the Visualizer‘s on-screen menu in the View mode.
NAVIGATION icons
Move to the next or previous „slide” image.
These icons have no function in automatic slide show mode.
EXIT icon
End the current slide show. An on-screen menu appears to confirm the exiting of the
slides show. The screen switches to the menu screen to allow a response to the on-
screen menu.
PiP icon
Display the current image in a small PiP box at the lower left while displaying the live
camera image in a larger box at the upper right. Tapping the PiP icon again toggles
back and the Visualizer displays the previous image (see page 16).
VIEW icon
Toggle between viewing the current slide show image and the live camera image.
*MAGIC WAND screen - special functions
Navigate to this screen by tapping the MAGIC WAND icon in the menu bar.
PRESET icons (programmable settings)
To recall a preset configuration setting, tap the PRESET icon quickly.
To capture the current configuration and save it as a preset, press and hold the
PRESET icon for at least 2 seconds.
SNAPSHOT icon
Store a JPG snapshot of the live camera image in a file in the current USB folder,
when a USB-storage device is present, or in the next available internal memory slot
when no USB-device is present.
MENU icon
Open the on-screen menu of the Visualizer. The control panel will show the menu
screen.
EXTERN icon
Toggle between the signals sent to the output ports: either the live camera image or
the signal from the External Input port.
IMAGE TURN icon
Rotate the orientation of the output image by 90°. Each tap of the icon rotates the
image another 90°.
PiP icon
Display the current image in a small PiP box at the lower left while displaying the live
camera image in a larger box at the upper right. Tapping the PiP icon again toggles
back and the Visualizer displays the previous image (see page 16).
LIGHT icon
Toggle on and off the synchronized light field on the working surface. If an optional
lightbox is connected to the Visualizer, the icon is a three-way toggle between
synchronized light field, light box and no light.
MEMORY ZOOM MODE screen - pan around a zoomed image retrieved from memory
Navigate to this screen by performing a zoom operation on a recalled image from internal or USB memory (or
tapping the options icon when memory zoom mode is active).
NAVIGATION icons
Pan around the zoomed image using the four arrow icons.
EXIT icon
Exit the zoomed display of a saved image. The non-zoomed version of the image will
be re-displayed and the ZOOM MODE screen will be exit and the previous screen will
be displayed.