WolfVision VZ-C32 3 User Manual - Handbuch (Seite 17)

16
For regular use of the WolfVision Visualizer, it is not necessary to go into the Visualizer's menu and change
settings. Inexperienced users should not make any adjustments here.
To enter the on-screen menu press the MENU key (#21). Settings of the Visualizer's basic functions and the
built-in camera can be made here using the 4 SELECT keys on the remote control (=the numerical keys
with arrows #24).
If more information on a function in the on-screen menu is required, set the cursor in the respective line and
press the HELP / ? key (#23). A detailed description of this function appears on the screen.
If you want to reset the selected item to the default setting, press the HELP key for 2 seconds.
By pressing the MENU key for 2 seconds the Extra Menu appears.
In the Extra Menu, settings like baud rate can be changed.
The functions of the on-screen menu are not described in detail in this user manual as the help menu is an
integrated part of the Visualizer's software (firmware). The information you see on your screen always
belongs to the current Visualizer firmware.
In the "Power Control" settings of the on-screen menu you can select that the Visualizer will be
automatically switched off after a certain amount of time.
The settings in the on-screen menu can be set back to defaults. "Recall Default Settings" is one item in the
on-screen menu (alternatively, the menu can be reset by keeping pressed both FOCUS keys (#29)
simultaneously until the power LED on the unit flashes, then press the MEMORY 4 key (#24)).
If you only want to reset the item that is currently selected to the default setting, keep the HELP key (#23)
pressed for 2 seconds.
The following chapter is for experienced users only:
ON-SCREEN MENU / ON-SCREEN HELP
Changing the Color Settings
Auto Power-off
RESET OF ON-SCREEN MENU SETTINGS
In the "Preset Settings" the Preset keys can be assigned specific functions such as "NEGATIVE/BLUE",
BLACK/WHITE", "LIGHT", "PiP", "TEXT", etc.
Preset Settings
If the picture on your screen appear to be too light or too dark or the color saturation is not correct, you can
change the Color Mode in the on-screen menu (Color Settings). Pre-settings are PRESENTATION (higher
color saturation), NATURAL (sRGB) and VIDEO CONF (for video conferencing systems).
Alternative Gamma and Saturation can be changed manually.
The output image of the Visualizers can be switched from positive to negative in the on-screen menu. In
addition, the background of a negative image can be switched to blue for better readability of text. You can
also switch between color or black and white in the on-screen menu.
TIP: If you often switch to negative, negative/blue or black/white images you can assign this function to one
of the Preset keys in the on-screen menu.
Switching to Negative, Negative/Blue and Black/White
Open „Device Info” in the sub menu „Advanced Settings” to view details of the unit.
Device information und Firmware version