WolfVision VZ-8light 2 - Handbuch (Seite 7)

6
Eliminating reflections
In order to eliminate reflections (on high gloss photographs etc.)
just move the recorded object or document and rotate the camera
head to center the desired pick-up area.
It is also possible to turn the camera arm with the light up or down
wards and rotate the camera head to the center of the desired pick-
up area to eliminate reflections.
Please note that reflections can also be caused by general room
lighting conditions.
1. Connect the power pack to the power-input (#22).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of the
Visualizer
(#16, #17, #18, #19 or #20).
IMPORTANT:
For choosing the right output please read the
detailed description on page 11!
3. Pull the arm upwards by using the pull pad (#6).
4. Turn the camera head to working position.
5. Switch on the Visualizer with the power key.
Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: zoom size: approx. 20 x 15 cm (DIN A5), autofocus: on, auto iris: on.
Setting Up the Visualizer
Shooting Area on the Working Surface
The working surface of the Visualizer (#10) has a special crystalline white color,
which is especially designed for perfect reproduction of transparencies.
In the following cases, an optional lightbox is recommended:
- If the transparency is very dark
- If the transparency is very wavy and causes reflections
- If the room light causes reflections on a transparency
Working Surface
Connect the power cord of the WolfVision lightbox to the lightbox connector (#23) on the
back of the Visualizer. The LIGHT key (#25) of the Visualizer can now be used to switch
between the light of the Visualizer and the light of the WolfVision lightbox.
When using a lightbox with a separate power supply be sure that the light of the Visualizer
is switched off to prevent reflections.
External WolfVision Lightboxes (optional)