LumaSense Technologies IRC 45 ... 150 - Handbuch (Seite 3)

Prüfstrahler IRC 45 … IRC 150
3
1 General
1.1
Information about the user manual
Congratulations on choosing one of this high quality IMPAC calibration source.
Please read this manual carefully, step by step, before using the calibration source. For operation
of the instrument this manual is an important source of information and work of reference. To
avoid handling errors keep this manual in a location where you always have access to.
Additionally to this manual the manuals of the components used are valid. All notes – especially
safety notes – are to be considered.
Should you require further assistance, please call our customer service hotline in Frankfurt,
Germany, +49 (0)69 9 73 73-0 or Oakland, America +1 201 405-0900 or call from America 800-
631-0176.
1.2
Limit of liability and warranty
All general information and notes for handling, maintenance and cleaning of this instrument are
offered according to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any examples or
processes mentioned in this manual or in case the content of this document should be incomplete
or incorrect. LumaSense Technologies reserves the right to revise this document and to make
changes from time to time in the content hereof without obligation to notify any person or persons
of such revisions or changes.
All IRC calibration sources from LumaSense Technologies have a warranty of two years from the
invoice date. This warranty covers manufacturing defects and faults which arise during operation
only if they are the result of defects caused by LumaSense Technologies.
This warranty is void if the instrument is disassembled, tampered with, altered or otherwise
damaged, without prior written consent from LumaSense Technologies.
1.3
Terminology
The used terminology corresponds to the VDI- / VDE-directives 3511, page 4.
1.4
Copyright
All copyrights reserved. This document may not be copied or published, in part or completely,
without the prior written permission of LumaSense Technologies. Contraventions are liable to
prosecution and compensation. All rights reserved.
1.5
Disposal / decommissioning
An inoperable calibration source has to be disposed corresponding to the local regulations of
electro or electronic material.
1.6
Safety
The IRC calibration sources are high quality control units. Avoid damage due to collisions, dirt and
condensation.
Attention: Don’t touch the surface of the calibration source (damage, risk of burns due to hot
surfaces)!