HP df840p1 Rahmen für Digitalbilder - Handbuch (Seite 15)

15
Set the Date and Time
1. On the CALENDAR/CLOCK screen, press .
2. Select Set Date/Time , and then select the options and use to change the field values.
3. Select Done .
DPF to PC – USB Connection
You can connect the DPF to a Windows PC or Macintosh computer via a USB cable to copy files between the computer
and the DPF’s internal memory.
If you have memory cards inserted in the DPF, you can also copy between the PC, internal memory, and memory cards.
Connect DPF to Windows PC
1. Connect the small end of the USB cable to DPF’s Mini USB port, and the larger end to an available USB port on
your computer.
2. A window opens listing all drives connected to your computer.
3. The internal memory (titled HP_DPF) and each memory card present in the DPF will be associated with one disk
drive on your PC.

IMPORTANT: If your PC is connected to Local Area Network drives, or if you have multiple drive letters
already assigned to peripheral devices, you will need to manage your drive settings in
Windows to free up the four drive letters immediately following your CD-ROM drive so the
DPF can assign them to memory card slots properly.
4. Double-click the desired drive to display the files on the card.
5. To copy files from a media source, select and drag them into the DPF’s internal memory drive (HP_DPF).
6. Similarly, to copy files from your computer to the internal memory, first locate the files on your computer, select
the files you want to copy, and then drag and drop them into the DPF’s internal memory drive.
TIP: Most cameras and graphic programs store photos in the Windows XP ‘My Pictures’ or Vista ‘Pictures’
folder. If you didn’t save them to any other location, you may find them there.
Disconnect DPF from Windows PC
It is important to always perform a safe PC ‘release’ before disconnecting the DPF USB cable from the PC.
WARNING: Do not unplug or switch off the DPF when files are being transferred, as that can seriously damage the
memory.
Windows Vista
1. On the Windows System Tray, click the hardware removal icon.
2. Click
the Safely remove USB mass Storage device message corresponding with the DPF device drive.
3. When the message “This device can now be safely removed from the computer” appears, you can disconnect the
USB cable from your computer.
Windows XP
1. On the Windows System Tray, click the hardware removal icon.
2. Click
Remove Hardware Safely .
3. Select the storage device corresponding with the DPF, and then click Stop to disconnect. A final dialog box
opens.
4. Click Close .
5. When the message “It is now Safe to Disconnect Hardware” appears, you can disconnect the USB cable from
your computer.