Operating the appliance, Note, Control panel – Siemens LC86KA670 Benutzerhandbuch

Seite 13: Setting the fan, Fan run-on time, Notes, Intensive setting, Lighting, Cleaning and maintenance, Risk of burns

Advertising
background image

13

Operating the appliance

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

Note: Switch on the extractor hood when you start cooking and

switch it off again several minutes after you have finished

cooking. This is the most effective way of removing the kitchen

fumes.

Control panel

Setting the fan

Note: Always adjust the fan strength to meet current conditions.

If there is a large build-up of steam or fumes, select a high fan

setting.
Switching on
Press button 1, 2 or 3.
Switching off the appliance
Press the "Off" button.

Fan run-on time

The fan run-on is possible in any fan speed.

1.

First, press the button for the required fan speed 1, 2 or 3.

2.

To activate the fan run-on, press and hold the

x

button for

2 seconds.

3.

To end the fan run-on early, press the "Off" button.

Notes

The run-on time for all fan speeds is 30 minutes. Once this

time has elapsed, the ventilation and lighting automatically

switch off.

The fan speed can be changed during the run-on time.

Intensive setting

You can use the intensive setting if there is a large build-up of

odours and fumes/vapours.

1.

To activate the intensive setting, press and hold the "Int."

button for 2 seconds.

2.

To end the intensive setting early, press the "Off" button.

Note: The time of the intensive setting is 10 minutes. Once this

time has elapsed, the appliance switches back to the fan

setting that was previously set.

Lighting

The lighting can be switched on and off independently of the

ventilation.
Press the

@

button.

Setting the brightness
When switching on the lights, press and hold the

@

button for

2 seconds. The brightness is reduced.

Note: When switching on the lights again, the brightness is set

to maximum once again.

Cleaning and maintenance

:

Risk of burns!

The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.

:

Risk of electric shock!

Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, pull out the
mains plug or switch off the circuit breaker in the fuse box.

:

Risk of electric shock!

Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.

:

Risk of injury!

Components inside the appliance may have sharp edges. Wear
protective gloves.

Cleaning agents

Observe the information in the table to ensure that the different

surfaces are not damaged by using the wrong type of cleaning

agent. Do not use

harsh or abrasive cleaning agents,

cleaning agents with a high concentration of alcohol,

hard scouring pads or sponges,

high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Explanation
Off

Fan off

1

Fan speed 1

2

Fan speed 2

x

Fan run-on

3

Fan speed 3

Int. Intensive setting

B

Light on/off

Advertising