Samsung LE40D579K2S Benutzerhandbuch
Seite 5
English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
Select the Home Use mode. Store Demo mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold
MENU
for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not
able to use. Please select Home Use when you watch at home.
3
Selecting a country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country.
After selecting the country in the Country menu, some models may proceed with an additional
option to setup the pin number.
When you input the PIN number, 0-0-0-0 is not available.
4
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
5
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select Air(Digital & Analogue/Digital/Analogue), Cable(Digital & Analogue/Digital/Analogue)
or Satellite.
6
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For more
information, refer to Channel
→ Auto Tuning.
✎
When Air or Cable is selected first: After all Air or Cable channels are stored, the step for
storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the step for storing
Air or Cable channels is displayed.
✎
Press the
ENTER
E button at any time to interrupt the memorisation process.
7
Enjoy your TV.
Select the Watch TV. Press the
ENTER
E button.
✎
If you select the Networking Settings, set the network. For more information, refer to
“Network menu” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (
MENU
→ System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0” :
MUTE
→ 8 → 2 → 4 →
POWER
(on)
VHF/UHF Antenna
Satellite Antenna
Cable
or
TV Rear Panel
Power Input
[LD570-ZG]BN68-03398K-L02.indb 5
2011-02-21 �� 11:00:09