Samsung PS58B859Y1W - Handbuch (Seite 29)

English - 29
Continued...
LAN Connection for Static IP Environment „
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,
subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).
1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N
If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. N
You must enter these values to complete the network settings. If you do not know the values, ask your network administrator.
For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding product. N
You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N
If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP. N
For the procedures to use a static IP address, ask your Internet Service Provider. N
Network Connection - Wireless
❑
You can connect to the network wirelessly through a wireless IP sharer.
1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB 1 (HDD) or USB 2 terminal of the TV.
You must use the ‘Samsung Wireless LAN Adapter to use a wireless network. N
Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, N
Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must be connected to a wireless IP sharer. N
If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. N
Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNA N
video over IEEE 802.11B/G connection, the video may not be played smoothly.
If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on. N
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently N
being used by another device nearby, this will result in interference and communications may fail.
TV Rear Panel
LAN Cable 1
The LAN Port
on the Wall
TV Rear Panel
LAN Cable
IP Sharer
LAN Cable
The LAN Port
on the Wall
You can connect the LAN via a Sharer (Router).
TV Rear Panel Samsung Wireless LAN
Adapter
LAN Cable
Wireless IP sharer
The LAN Port
on the Wall
BN68-02196H-Eng.indb 29 2009-05-29 �� 5:31:53