Spektrum SPM2800US DX10t - Handbuch (Seite 7)

7 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
Main Screen
USING THE TRANSMITTER
NOTICE: While DSMX allows you to use more than 40 transmitters simultaneously, when using DSM2 receivers, DSMX receivers in
DSM2 mode or transmitters in DSM2 mode, do not use more than 40 transmitters simultaneously.
SD Card
Use an SD Card and the Transfer SD Card screen in the System
Setup list to to do the following:
• Import (copy) models from another DX10t transmitter
• Export (transfer) models to another DX10t transmitter
• Update AirWare™ software in the transmitter
• Share model files among DX10t transmitters.
Put an SD card in the SD card slot on the right side of the
transmitter with the card’s label facing forward.
Function
A Model Memory
B Model Name
C Throttle Stick Position
D Transmitter Battery Charge Level
E
Digital Battery Voltage
(an alarm sounds and the screen flashes when battery charge
gets down to 6.4V for a LiPo battery.)
F Model Type
G
Elevator Trim (Mode 2)
Throttle Trim (Mode 1)
H Aileron Trim
I Rudder Trim
J Timer
K
Throttle Trim (Mode 2)
Elevator Trim (Mode 1)
J
K
I
H
D
G
F
E B
A
C
MODE CHANGE
The DX10t is in Mode 0 from the box. The desired mode must
be manually set prior to operation using the screws on the back
of the transmitter. You can change the mode in System Settings,
under the System Setup menu. Screw in the Torx® screw until you are not able to turn or when
the cantilever arm has fully disengaged. Adjust the tension
screws to your preference.
Mode Change
2/4
Throttle Strap
Tension
Mode Change
1/3
Mode Change
2/4
Elevator
Tension (2)
Elevator
Tension (1)
Aile/Rudd
Tension (2/1)
Aile/Rudd
Tension (1/2)