Sony KLV-V26A10 - Handbuch (Seite 40)

40
GB
Some tiny black points and/or
bright points on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a malfunction.
No colour on programmes • Select “Reset” in the “Picture Adjustment” menu to return to the factory
settings (page 22).
No colour or irregular colour
when viewing a signal from the
Y, P
B
/C
B
, P
R
/C
R
jacks of 3
• Check the connection of the Y, P
B
/C
B
, P
R
/C
R
jacks of 3 .
• Make sure that the Y, P
B
/C
B
, P
R
/C
R
jacks of 3 are firmly seated in their
respective sockets.
Sound
Problem Cause/Remedy
No sound, but good picture • Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Features” menu (page 26).
Noisy sound • See the “Picture noise” causes/remedies on page 39.
Audio distortion • See “Audio Filter” on page 33.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode) • Check if the Sleep Timer function is activated (page 28).
• Check if the Auto Shutoff is activated (page 28).
• If no signal is received or no operation is performed in the TV mode for 10
minutes, the TV automatically switches to standby mode.
Some input sources cannot be
selected • Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input
source (page 31).
The remote does not function • Check that the remote is set correctly for the equipment you are using.
• If the remote does not operate the equipment even when the remote has
been set correctly to equipment, enter the necessary code set as explained in
“Programming the remote” (page 36).
• Replace the batteries.
Wrong characters appear
when viewing the menu/Text/
NexTView • Select “Language” and “Country” in the “Set Up” menu and set the
language and country/region in which Text/NexTView is provided
(page 29). For Cyrillic languages, we recommended that you select Russia
if your own country/region does not appear in the list.
Problem Cause/Remedy