Sony ICD-PX440 Benutzerhandbuch

Seite 164

Advertising

Go to Page Top

5. Press STOP to exit the menu mode.

The setting process is finished and “

” (alarm indicator) appears in the display window.

When the set date and time comes, the IC recorder is automatically turned on and “ALARM” is displayed in the display
window. Then the alarm and the selected file will be played back using the selected alarm pattern. When the playback
ends, the IC recorder will stop automatically. (When the alarm pattern is set to “Beep&Play” or “Play,” the IC recorder
will stop at the beginning of the selected file.)

Descriptions of the alarm pattern

You can select one of the menu items available.
Beep&Play:
The selected file is played back after the alarm sounds.
Beep:
Only the alarm sounds.
Play:
Only the selected file is played back.

Note

An alarm will not sound during recording. The alarm will start playing after you stop the recording.
You cannot select a podcast file or a file stored on a memory card for the alarm sound.

Hint

To change the alarm setting, select the file you want to change its alarm setting, and then follow steps 2 through 5.
To cancel the alarm setting, follow steps 1 and 2. In step 2, select “OFF” (instead of “ON”) and press . The alarm
will be canceled and the alarm indicator will disappear from the display window.
To stop the alarm playback, press any button other than VOL –/+ while the alarm sound is heard. If the HOLD
function is activated, you can stop the alarm playback by pressing any button.