Troubleshooting – AEG S83600CSW1 Benutzerhandbuch

Seite 13

Advertising
background image

7. TROUBLESHOOTING

CAUTION!
Before troubleshooting, discon-
nect the power supply.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.

There are some sounds during
normal use (compressor, refriger-
ant circulation).

Problem

Possible cause

Solution

The appliance is
noisy.

The appliance is not sup-
ported properly.

Check if the appliance
stands stable (all the four
feet should be on the
floor).

The compressor op-
erates continually.

The Temperature regula-
tor may be set incorrectly.

Set a warmer temperature.

The door is not closed
correctly.

Refer to "Closing the
door".

The door has been
opened too frequently.

Do not keep the door
open longer than necessa-
ry.

The product temperature
is too high.

Let the product tempera-
ture decrease to room
temperature before stor-
age.

The room temperature is
too high.

Decrease the room tem-
perature.

The FROSTMATIC func-
tion is switched on.

Refer to "FROSTMATIC
function".

The COOLMATIC func-
tion is switched on.

Refer to "COOLMATIC
function".

Water flows on the
rear plate of the re-
frigerator.

During the automatic de-
frosting process, frost de-
frosts on the rear plate.

This is correct.

Water flows into the
refrigerator.

The water outlet is clog-
ged.

Clean the water outlet.

Products prevent that wa-
ter flows into the water
collector.

Make sure that products
do not touch the rear
plate.

Water flows on the
ground.

The melting water outlet
does not flow in the evap-
orative tray above the
compressor.

Attach the melting water
outlet to the evaporative
tray.

There is too much
frost and ice.

Products are not wrapped
properly.

Wrap the products better.

The door is not closed
correctly.

Refer to "Closing the
door".

ENGLISH

13

Advertising