AEG DVD 4551 LCD - Handbuch (Seite 49)

English
49
Pause Playback 1. Press the “ ” button (Fig. 3/7) on the remote control. The playback
is interrupted and the current image is frozen.
2. Press the “ ” button (Fig. 3/7) on the remote control, to restart
“normal” play.
Change Audio-Language/
Audio-Mode Press the AUDIO button (Fig. 3/5), repeatedly to change the audio-
language. The available languages are dependent on the DVD.
NOTE:
If the medium does not support this function, (e.g. on a CD), you can
change the audio mode with this button, e.g. set it to “mono” or
“stereo”.
Show Sub-Titles Press the SUBTITLE button (Fig. 3/20) repeatedly if you want to activate,
deactivate or select a different subtitle language. The available subtitle
languages are dependent on the DVD.
Stop Playback During playback press “ K ” button (Fig. 3/7). This will stop play.
Press the “ K ” button again (Fig. 3/7) to continue the playback from
the last position.
Press the “
K ” button twice (Fig. 3/7) to stop reply entirely. If you press
the “ ” button (Fig. 3/7) again, the CD/DVD will start from the
beginning.
Select previous Chapter/ Track Press “ ” button (Fig. 3/9) to return to the beginning of the previous
chapter or track.
Select next Chapter/Track Press “ ” (Fig. 3/9) to forward to the next chapter or track.
Direct Track Selection Enter the number of the desired chapter/track using the numeric but-
tons on your remote control (Fig. 3/22).
Playback will start shortly.
Select a Passage using the Menu For your convenience, you may select respective media passages directly
from you screen menu as follows:
1. Select the desired category by repeatedly pressing the SEARCH but-
ton (Fig. 3/24).
2. Use the navigation buttons (Fig. 3/9) to select the category.
3. Enter the moment in time for playback to start. Depending on the
media type this can be a track number, a chapter or a time. Enter the
values with the
numeric buttons (Fig. 3/22). Playback starts after a
short moment.
Repeat DVD-Title/Chapter 1. Select chapter or title to be repeated.
2. Press the REPEAT button (Fig. 3/16). “Chapter” is displayed.
3. Press the REPEAT, button again until “Title” or “All” is displayed.
Repeat CD-Track 1. Select the track to be repeated.
2. Press the REPEAT button (Fig. 3/16). “Track” is displayed.