Technical data, Installation, Closing the door – AEG A51100TSW0 Benutzerhandbuch

Seite 14: Positioning

Advertising
background image

Problem

Possible cause

Solution

Temperature Regulator is not on Check the Temperature Regulator

Green indicator flashing

Temperature sensor problem

Call the service personnel

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension

Height

1250 mm

Width

545 mm

Depth

640 mm

Rising Time

18 h

Voltage

230 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a location where the ambient temperature

corresponds to the climate class indicated on the rating plate of the appliance:

Climate class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

14

Technical data

Advertising