Important safeguards – Bosch BasicDome Series Benutzerhandbuch

Seite 2

Advertising
background image

Suspended Ceiling Mount Backbox Modules | Instruction Manual | Important Safeguards

Bosch Security Systems | 15 May 2003

EN

|

2

Important Safeguards

1. Read and Retain Instructions - All safety and

operating instructions should be read before the unit
is operated. Follow all operating and use
instructions.

2. Heed Warnings - Adhere to all warnings on the

unit and in the operating instructions.

3. Attachments - Attachments not recommended by

the product manufacturer should not be used, as
they may cause hazards.

4. Accessories - Do not place this unit on an unstable

stand, tripod, bracket, or mount. The unit may fall,
causing serious injury to a person and serious
damage to the unit. Use only with a stand, tripod,
bracket, or mount recommended by the
manufacturer or sold with the product. Any
mounting of the unit should follow the
manufacturer's instructions and should use
a mounting accessory recommended by the
manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.

5. Power Sources - This unit should be operated only

from the type of power source indicated on the label.
If unsure of the type of power supply to use, consult
your dealer or local power company. For units
intended to operate from battery power or other
sources, refer to the operating instructions. This
equipment is to be isolated from the mains supply by
a limited power source as specified in EN60950.

6. Power Lines - An outdoor system should not be

located in the vicinity of overhead power lines or
other electric light or power circuits or where it can
fall into such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching such power lines or
circuits as contact with them might be fatal. U.S.A.
models only - refer to the National Electrical Code
Article 820 regarding installation of CATV systems.

7. Servicing - Do not attempt to service this unit

yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

8. Replacement Parts - When replacement parts are

required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.

9. Safety Check - Upon completion of any service or

repairs to this unit, ask the service technician to
perform safety checks to determine that the unit is
in proper operating condition.

10. Coax Grounding - If an outside cable system is

connected to the unit, be sure the cable system is
grounded. U.S.A. models only--Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information with respect to proper
grounding of the mount and supporting structure,
grounding of the coax to a discharge unit, size of
grounding conductors, location of discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.

Advertising