English – Philips SENSEO® Kaffeepadmaschine Benutzerhandbuch

Seite 2

Advertising
background image

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that Philips offers,

register your product at www.philips.com/welcome.

Make your coffee moments truly special with SENSEO

®

.

This unique system combines the easy-to-use Philips

SENSEO

®

coffee machine with the specially developed

Douwe Egberts SENSEO

®

coffee pods, giving you a full,

smooth coffee with a delicious foam layer.

The Douwe Egberts coffee in convenient SENSEO

®

coffee pods and Philips’ unique new SENSEO

®

brewing system are perfectly matched to ensure that the

best taste and aroma are extracted from the coffee.

To ensure a smooth and full coffee taste, you should keep

the following things in mind:

Fresh water

Use fresh water every day.

Fresh coffee pods

Use the SENSEO

®

coffee pods that have been specially

developed by Douwe Egberts for your SENSEO

®

coffee

machine for a full, round taste. The Douwe Egberts

SENSEO

®

coffee pods stay fresh longer if you store them

in an airtight storage container.

A clean machine

Clean and descale your coffee machine regularly as

described in the chapters ‘Cleaning’ and ‘Descaling’.

Remove used coffee pods after brewing. If you have

not used the machine for some time, flush the machine

before you use it again (see section ‘Flushing the machine’

in chapter ‘Cleaning’).

This machine is intended for household use only and not

for professional use.

General description (Fig. 1)

A

1-cup button

B

On/off button with light

C

2-cup button

D

Lid release lever

E

Lid

F

Sealing ring

G

Water distribution disc

H

1-cup pod holder q

I

2-cup pod holder qq

J

Coffee collector

K

Decorative spout cover

L

Coffee spout cover

M

Coffee spout

N

Cup tray

O

Drip tray

P

Height adjustment hooks of drip tray

Q

Height adjustment slots for drip tray

R

Guide lines for adjusting drip tray

S

Water reservoir

T

Water reservoir grip

U

Anti-splash rim

Important

Read this user manual carefully before you use the

machine and save it for future reference.

Danger

Never immerse the machine in water or any other

liquid.
Warning

Check if the voltage indicated on the bottom of

the machine corresponds to the local mains voltage

before you connect the machine.

This machine is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the machine by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the machine.

Do not use the machine if the plug, the mains cord

or the machine itself is damaged.

If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualified persons in order to avoid

a hazard.

-

-

-

-

-

-

Caution

Always return the machine to a service centre

authorised by Philips for examination or repair.

Do not attempt to repair the machine yourself,

otherwise your guarantee becomes invalid.

Never put normal ground coffee or use torn pods in

the SENSEO

®

machine, as this causes it to become

blocked.

Do not use the machine in combination with a

transformer, as this could cause hazardous situations.

Always put the machine on a flat and stable surface.

Never let the machine operate unattended.

Do not use the machine at altitudes higher than

2200 metres above sea level.

The machine does not work at temperatures below

10°C.

Flush the coffee machine with fresh water before you

use it for the first time (see chapter ‘Preparing the

machine for use’). This causes the boiler to fill with

water, which is essential for the machine to work

properly.

Do not use the SENSEO

®

machine in combination

with water softeners based on sodium exchange.

Philips strongly advises you to descale this SENSEO®

machine every 3 months. If the machine is not

descaled in time and according to the procedure

described in chapter ‘Descaling’, this may lead to

technical failures.

Never interrupt the descaling process.

Never use a descaling agent based on mineral acids

such as sulphuric acid, hydrochloric acid, sulphamic

acid and acetic acid (e.g. vinegar). These descaling

agents may damage your SENSEO

®

coffee machine.

- Never turn your SENSEO

®

machine on its side.

Always keep it in upright position, also during

transport.
Electromagnetic fields (EMF)

This machine complies with all standards regarding

electromagnetic fields (EMF). If handled properly

and according to the instructions in this user manual,

the machine is safe to use based on scientific evidence

available today.

Preparing the machine for use

You cannot brew coffee if you have not flushed the

SENSEO

®

coffee machine first!

The flushing cycle causes the boiler to fill with water.

After this, the coffee machine is ready for use.

Flush the machine in the following way:

1

Tilt the water reservoir outwards and lift it out of

the machine (Fig. 2).

2

Fill the water reservoir with cold water up to the

MAX indication. (Fig. 3)

3

To put the water reservoir back into the machine,

tilt it slightly and insert the bottom of the water

reservoir first (1). Then press home the top part of

the water reservoir (2).

4

Move the lid release lever upwards (Fig. 4).

5

Open the lid (Fig. 5).

6

Put the 1-cup pod holder q or the 2-cup pod

holder qq in the machine without pod or

pods. (Fig. 6)

7

Close the lid and lock the lever (Fig. 7).

Note: To make sure the lever is locked properly, push it down

until it snaps home with a click. It is not possible to flush the

machine when the lid is not properly closed.

8

Put the plug in an earthed wall socket.

9

Put a bowl (with a capacity of at least 1500ml)

under the coffee spout to collect the water. (Fig. 8)

Note: Make sure the bowl is placed stably on the drip tray

or the foot of the machine to prevent it from wobbling or

toppling over during the flushing cycle. You can also use a

square or rectangular container.

10

Press the on/off button 3 (1) and then press the

1-cup button q and the 2-cup button qq briefly

at the same time (2). (Fig. 9)

The boiler fills itself with water from the water

reservoir. This takes some time (approx. 90 to 150

seconds). During the flushing cycle, the machine

produces more noise than during a regular brewing

cycle.

-

-

-

-

-

-

-

-

-

-

-

-

,

Note: Before you use the machine for the first time, clean

the coffee spout, the cover of the coffee spout, the coffee

collector, the pod holders and the water reservoir in the

dishwasher or with hot water and some washing-up liquid.

Now your Philips SENSEO

®

coffee machine is ready for

use.

Using the machine

If you only get a small quantity of coffee or no coffee

at all out of the machine, you have not flushed the

machine properly before first use. As a result, the boiler

is not or only partly filled. Flush the machine properly

(see chapter ‘Preparing the machine for use’) before you

brew another cup of coffee.

1

Fill the water reservoir with cold water up to

the MAX indication and put it back into the

machine. (Fig. 10)

Never pour milk, coffee, hot water or carbonated water

into the water reservoir.

q

MIN: minimum amount of water required to brew

1 cup of SENSEO

®

coffee.

qq

MIN: minimum amount of water required to

brew 2 cups of SENSEO

®

coffee.

A full reservoir allows you to make SENSEO

®

coffee

a number of times (up to

8 cups). This makes it unnecessary to fill the water

reservoir each time you want to make a cup of

coffee.

2

Press the on/off button 3. (Fig. 11)

The light in the on/off button flashes slowly while

the water heats up. Heating up takes approx. 75

seconds.

The coffee machine is ready for use when the light

in the on/off button lights up continuously.

Note: If the water reservoir does not contain enough water

to brew one cup of SENSEO

®

coffee, the light in the on/off

button flashes rapidly and the 1-cup and 2-cup buttons

cannot be operated.

3

Move the lid release lever upwards (Fig. 4).

4

Open the lid (Fig. 5).

5

Place the appropriate pod holder in the machine.

Note: Make sure the pod holder is clean and the sieve in the

centre is not clogged, e.g. with loose coffee grains.

If you want to make one cup of SENSEO

®

coffee,

use 1 coffee pod in combination with the 1-cup pod

holder q and the 1-cup button q. (Fig. 12)

If you want to make two cups of SENSEO

®

coffee,

use 2 coffee pods in combination with the deeper

2-cup pod holder qq and press the 2-cup button

qq

. (Fig. 13)

6

Place the SENSEO

®

coffee pod or pods properly in

the centre of the pod holder with the convex side

pointing downwards.

Note: Use SENSEO

®

coffee pods from Douwe Egberts

especially designed for your SENSEO

®

coffee machine for a

full and round taste.

Place 1 SENSEO

®

coffee pod in the 1-cup pod

holder q. (Fig. 14)

Place 2 SENSEO

®

coffee pods in the 2-cup pod

holder qq. (Fig. 15)

Note: Make sure the coffee in the pod or pods is evenly

distributed and press the pod or pods lightly into the pod

holder.
Never put normal ground coffee or use torn pods in

the machine, as this causes it to become blocked.

7

Close the lid and lock the lever (Fig. 16).

Make sure you push down the lid lever until it snaps

home with a click.
Note: It is not possible to brew coffee when the lid is not

properly closed and the lid lever is not locked.

8

To adjust the drip tray to the size of the cups you

want to use, first detach the drip tray by sliding it

slightly upwards (1) and then pulling it towards you

(2) (Fig. 17).

9

To reattach the drip tray, push it against the front of

the machine at the required height (1). Make sure

the top of the back plate of the drip tray is on one

line with one set of guide lines. Then slide the drip

-

-

-

,

,

-

-

-

-

4222.200.0182.2

2/8

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: