ADAM Audio A7 - Handbuch (Seite 6)

6
2. Quick Start
Important Information for set up
After having unpacked your loudspeaker, please allo� the system to accli�
mate to the temperature of the room. Please do not connect the speaker for
approximately an hour.
We recommend using high quality cables to guarantee optimal performance.
It is important to ensure the speakers stand firmly on a solid ground!
We recommend not to damage the package and to retain it. �he original pack�
aging is the best guarantee for safe transportation (see 6., p. 12).
Please note that the loudspeakers �ill need a fe� days to achieve optimum
sonic performance.
Quick Start
Before connecting the loudspeakers to your audio components and the po��
er source make sure that both the loudspeakers and your audio system is
s�itched off and set the level controls fully counterclock�ise.
Connect your sound sources or mixing console to the speaker. Verify �hich
type of connector to use. �he RCA connectors are designed to receive
unbalanced, the XLR connector balanced signals. If both choices are
available, use balanced �iring. You �ill find the connector �iring printed on
the speaker’s rear panel.
Check if the specified voltage matches the voltage of the po�er supply you
use. If this is not the case do not connect the loudspeakers to a po�er source!
Please contact your local dealer or national distributor.
If the voltages match, connect the loudspeaker via the included po�er cables
to t�o AC sockets.
S�itch on the main on/off s�itches on the front panel of the loudspeakers.
Make sure that the line out level (volume) of your stereo is either at a lo� level
or all the �ay off. �hen, s�itch on your audio system.
�urn on your source of music and adjust the volume carefully.
2.1
2.2
d)
a)
b)
c)
e)
f)