ADAM Audio ANF10 - Handbuch (Seite 5)

5
Eng
lish
2. Quick Start
Important Information for set up
After having unpacked your loudspeaker, please allow the system to accli-
mate to the temperature of the room. Please do not connect the speaker for
approximately an hour.
We recommend using high quality cables to guarantee optimal performance.
It is important to ensure the speakers stand firmly on a solid ground!
We recommend not to damage the package and to retain it. The original pack-
aging is the best guarantee for safe transportation (see 6., p. 12).
Please note that the loudspeakers will need a few days to achieve optimum
sonic performance.
Quick Start
Before connecting the loudspeakers to your audio components make sure
that your audio system is switched off and set the level controls fully coun-
terclockwise.
Connection to the amplifier: There are 2 connectors on the back side of the
speaker, representing the (+) and (-) connection of the amplifier. Normally a
red connector indicates (+) and a black connector indicates (-). Please make
sure to use the corresponding connections:
In the case of mismatch the bass reponse will be compromised in level and
quality, and the stereo image will suffer, too.
Make sure that the line out level (volume) of your stereo is either at a low
level or all the way off. Then, switch on your audio system.
Turn on your source of music and adjust the volume carefully.
2.1
2.2
d)
a)
b)
c)
e)
+ –
Amp
+ –
Speaker