ADAM Audio S2.5A - Handbuch (Seite 5)

Manual S2.5A - page  of 12 Manual S2.5A - page 5 of 12
ROOM EQ - Adapting to room acoustics
A more detailed possibility to optimize the reproduction are the two shelve filters
at both ends of the frequency band. Above - or below - the given cut off frequency
the amplitude is progressively changed. The given dB values occur at 20 Hz and
20 kHz. We show five curves, the controls can be changed continuosly however.
ROOM EQ (shelve filter) for the high frequencies:
ROOM EQ (shelve filter) for the low frequencies:
The voltage gain of the tweeter amplifier and thus the complete tweeter level can
be varied in a ±4 dB range. This is a considerable change in the sound characteristic
and should be used with caution. If there is a strongly damped room or if there is
a special taste, this control will serve you well.
HIGH GAIN