Eppendorf Thermoblocks - Handbuch (Seite 7)

7
Instructions for use
4.1.3 Adapter plate for 0.2 ml tubes or 96 Well PCR plates
4.1.4 CombiBox
The CombiBox must not be screwed together.
 Place the CombiBox on the thermosocket.
4.2 Inserting tubes

Press the tubes lightly into the holders of the thermoblocks.
To maximize temperature control, transfer the micro test tubes in IsoRacks to the
thermoblock. The IsoRack reduces the heat exchange of the thermoblock with the
environment. If necessary close the IsoRack cover.
1. Remove the lock washers (4) from the
short screws in the exchangeable
thermoblock.
2. Remove the short screws.
3. Connect the adapter plate (2) to the
MTP thermoblock (3) using the long
screws (1).
4. Secure the screws from below using the
lock washers. The lock washers prevent
the screws from falling out of the bores if
the exchangeable thermoblock is not
fixed on the unit.
5. Place the adapter plate on the device
with the MTP thermoblock.
6. Tighten the screws.
1
2
3
4