Lenze CSB 14 - Handbuch (Seite 33)

Electrical installation
Adapter board assignment
5
l
µ
33 LDCDS−CSB7 DE/EN 1.0
5.2 Adapter board assignment
The adapter board is located within the mounting frame of the Command Station. The
scope of supply includes four connector plugs that are plugged on the basic housings of the
adapter board in position X1 to X4.
CSB 7
CSB−006
Description Type of connection Cable type
Connections for wiring the
control/display elements of
the control desk
10 pole Phoenix Combicon
socket with spring pressure
connection, type FK−MC
0.5/10−ST−2.5
Flexible due to wire end
ferrule, conductor
cross−section 0.14 ... 0.5 mm 2
CSB−008
Contact Assignment
X1 X2 X3 x4
1 Key voltage S1 ... S7
(e. g. +24 V)
LED−GND (LED 1 ... 7) Key voltage S1 ... S7
(e. g. +24 V)
N.C.
2 S 1.1 LED D1 anode S 1.2 N.C.
3 S 2.1 LED D2 anode S 2.2 N.C.
4 S 3.1 LED D3 anode S 3.2 N.C.
5 S 4.1 LED D4 anode S 4.2 N.C.
6 S 5.1 LED D5 anode S 5.2 N.C.
7 S 6.1 LED D6 anode S 6.2 N.C.
8 S 7.1 LED D7 anode S 7.2 N.C.
9 Emergency stop 1.1 Emergency stop 2.1 Potential I: S1/S5 Potential III: S3/S7
10 Emergency stop 1.2 Emergency stop 2.2 Potential II: S2/S6 Potential IV: S4