Installation, Important notes, Electrical data – Lenze EL 1xx MPI Benutzerhandbuch
Seite 29: Mechanical data
Installation
Important notes
LDCDS−EL100MA DE/EN 2.2
29
l
H1inst−MPI_Tab
4
Installation
Important notes
ƒ Before working on the HMI, the supply connector must be unplugged. This is
particularly important before opening the enclosure and connecting/removing
connectors.
ƒ The voltage input is not internally fused and may be destroyed if the input voltage is
too high. Observe the maximally permissible input voltage and professionally fuse
the device on the input side against voltage fluctuations and peaks.
ƒ During installation, see that the maximally permissible ambient temperature is not
exceeded. Corresponding measures for active or passive cooling must be taken if
required.
ƒ The HMI is a device of class A and can cause radio interference in residential areas. In
this case, the operator may have to take special measures. Any costs arising from
these measures have to be paid by the operator.
ƒ In the case of an error, send the HMI to the manufacturer. The address is provided on
the return envelope of this documentation. Please use the original packaging if you
return the HMI!
Electrical data
Supply
Type EL xxx
105m
105
106
108
110
110s
Voltage
[V]
DC 24 (+18 ... 30)
Current at 24 V
[A]
0.25
0.3
0.3
0.5
0.5
Power at 24 V
[W]
6.0
7.2
7.2
12.0
12.0
Mechanical data
Design and weight
Type EL xxx
105m
105
106
108
110
110s
Front
Aluminium with polyester film to DIN 42115
Cover
Sheet steel, galvanised
Weight
[kg]
1.1
1.1
1.2
1.5
2.0