Lenze ELCAFHIxxx4E34NNPM Highline - Handbuch (Seite 47)

l
47 EDKLCFH3024−EPM DE/EN 2.0
Status display: device
Pos. Colour State Description
ERR Red
Off No fault
Blinking Active fault
RUN Green
On Device enabled
Blinking Device inhibited
IN1 Green
On DI1 = HIGH
Off DI1 = LOW
IN2 Green
On DI2 = HIGH
Off DI2 = LOW
... ... ... ...
IN7 Green
On DI7 = HIGH
Off DI7 = LOW
IN8 Green
On DI8 = HIGH
Off DI8 = LOW
OUT1 Yellow
On DO1 = HIGH
Off DO1 = LOW
OUT2 Yellow
On DO2 = HIGH
Off DO2 = LOW
OUT3 Yellow
On DO3 = HIGH
Off DO3 = LOW
OUT4 Yellow
On DO4 = HIGH
Off DO4 = LOW
Status display: fieldbus interface
Pos. Colour State Description
BUS error Red Not active
BUS status Green
Off No communication with the PROFIBUS master
On The communication with the PROFIBUS master is established.
Status display: drive−based safety
Pos. Colour State Description
SAFE status Yellow
On Safe torque off (STO) is not active
Off Safe torque off (STO) is active
SAFE error Red
On
System error:
After a serious internal error STO is activated.
Off Error−free operation
SAFE IN1 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN2 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN3 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE IN4 Green
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE OUT1 Yellow
On The channels A and B are in the ON state.
Off At least one channel is in the OFF state
SAFE OUT2 Yellow Not active