Lenze 13.120 DC permanent-magnet motors - Handbuch (Seite 14)

ASPL 13.1003 DE/EN 1.0
14

DUMMY_NUM_Reset-anschluss-geber
Notes for mounting
ƒ Before transport
– Check that all transport locking devices are mounted.
– Tighten all transport aids.

Note!
Do not apply extra loads to the product as the transport aids (such as eye bolts
or bearing plates) are designed for the weight of the motor only (refer to the
catalogue for the weight).
ƒ Use an appropriate means of transport and lifting equipment!
ƒ The shaft must not be exposed to knocks or bumps! Motor can be destroyed! Drive
elements must be mounted on the motor shaft via the threading. An extracting
device must be used when dismounting. Fasten coupling securely.
ƒ Fasten motor and ensure unimpeded ventilation.
ƒ Tighten coupling ring of connector.
ƒ Motor must be carefully earthed, check cabling.
ƒ Extensive shielding of motor cable on motor and controller.
Forces placing strain on the shaft
The permissible loads mentioned in the table (15) either are to be understood as radial
or axial forces.
K12.311-08
Fig. 1 Points of application of radial and axial forces