Operating the machine, 6 operating the device, Caution – Retsch AS 450 basic Benutzerhandbuch
Seite 23: 7 switching on and off
Operating the machine
23
Fig. 9: Inserting the sieve stack
•
Place the sieve stack in the middle of the sieve plate.
•
Lay the clamping cover (E) over the threaded rods onto the top sieve.
Fig. 10: Attaching the sieve cover
•
Screw the two tension braces (D) onto the stand mount up to the clamping
lid.
•
Using both hands, tighten the tension braces.
If when removing the sieve stack the collecting pan sticks to the smooth surface of
the sieve support (G), we recommend use of talcum .
Pos : 9.13 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Bedienung des Gerätes @ 0\mod_1229416465774_9.doc @ 5052 @ @ 1
5.6 Operating the Device
Pos : 9.14 /00004 Warnhinweis e/V0006 VOR SICHT Gefahr von Pers onensc häd en Gefährlic he Stoffe @ 1\mod_1236238456269_9.doc @ 7634 @ @ 1
CAUTION
Danger of personal injury
Dangerous nature of the sample
–
Depending on the dangerous nature of your sample, take the
necessary measures to rule out any danger to persons.
•
Observe the safety guidelines and datasheets of your
sample material.
Pos : 9.15 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Ei n- / Aussc hal ten @ 0\mod_1229416527496_9.doc @ 5058 @ @ 1
5.7 Switching On and Off
Pos : 9.16 /00010 Bedi enungsanleitung en Kapitels ammlungen/AS450/0007 Bedi enung/AS450 basic Modul Ei n- Aussc halten neu @ 0\mod_1229416574201_9.doc @ 5064 @ 33 @ 1
Fig. 11: Switching on/off
H