Clearaudio CONCEPT - Handbuch (Seite 7)

Concept
User manual / Bedienungsanleitung
Page/ Seite 6  clearaudio electronic GmbH 2014
4. Important notes
Adjustment of the tracking force
Please check or adjust the tracking force always without a record on the platter!
The already pre-adjusted and recommended tracking force for the
Clearaudio Concept V2 cartridge is 2.0 g.
Adjustment of the tonearm height
As everything on the turntable is pre-assembled and tested, including tonearm and
cartridge, there is usually no need to change any parameters on the Concept - turntable.
If you want to change the height of your tonearm please refer to your nearest qualified
dealer or service personnel.
Your dealer can make the height adjustment on the side of the tonearm base of your
turntable (see pic. 8).
Clearaudio assumes no liability for wrong handling or any damages, if non
qualified persons take any action on adjustments.
Adjustment of the Anti-skating
As everything on the turntable is pre-assembled and tested, including tonearm and
cartridge, there is usually no need to change any parameters on the Concept - turntable.
If you want to change your cartridge and to adjust the Anti-skating please refer to your
nearest qualified dealer or service personnel.
Your dealer will find the Anti-skating – bolt on the underside of the turntable (see pic. 9).
Clearaudio assumes no liability for wrong handling or any damages, if non
qualified persons take any action on adjustments.
Pic. 9: Adjustment of the Anti-skating
Pic. 8: Adjustment of the tonearm height