Clearaudio EMOTION START SMART - Handbuch (Seite 12)

Emotion
User manual / Bedienungsanleitung
Page / Seite 11  clearaudio electronic GmbH 2008
5. Special directions
To achieve the full clearaudio warranty, it is necessary that you fill out and send
the corresponding part of the warranty registration card back to clearaudio, within
two weeks after purchase. Only if the product is returned in it’s original packing
clearaudio can provide the warranty.
Transportation advice: If any transportation of the Emotion Start Smart -turntable
should be necessary, please always remove the turntable platter. Otherwise serious
damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the
bearing. Always take of the pulley of the motor unit as well, to prevent the motor
shaft from any damages.
If the Emotion - Start Smart turntable is a longer time not in use, please disconnect
the motor from the mains supply.
Every two years you can lubricate (only if you will recognize speed variations) the
bearing of the turntable platter with the delivered oil. In this case it is enough to put
4 or 5 drops of the oil into bearing.
Please take special caution to any damages of the power cord. Any damages should
only be repaired only by authorized personal. A damaged power cord must be
exchanged immediately!
Caution ! Please use only non alcoholic fluids and only fluids specially used
for acrylic, to clean the Emotion Start Smart turntable. Otherwise could
occur damage to the material or the surface!!!