Clearaudio CHAMPION LEVEL II - Handbuch (Seite 15)

Champion
Level 2
Bedienungsanleitung / USER MANUAL
Seite/Page 15  clearaudio electronic GmbH 2006
4. SPECIAL INSTRUCTIONS
Please take the time to fill out the enclosed warranty card and return it to clearaudio or your local
distributor / dealer. If you do not return this card within 14 days after purchase the warranty will
expire after a period of two years from the date of purchase.
During any transportation of the turntable, always remove the platter and inverted bearing from the spindle.
If this is not done, DAMAGE COULD OCCUR!
Please regularly check the mains cable of your motor assembly. If there is any damage to any wire or the
mains plug, have them replaced immediately by a qualified person (your dealer or distributor).
To clean the turntable, use only special acrylic cleaner, which is not alcohol based. Otherwise you could
damage the acrylic surface (risk of hair cracks and stains).
5. Service
If the platter (without drive belt) does not turn as easy as usual, you should squeeze a 5mm long line of the
bearing grease into the upper part of the platter bearing.
If any service or repair on all clearaudio products is necessary, please contact your dealer / distributor or
contact clearaudio directly. We will inform you about your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be transported and/or
shipped.
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phon: +49-(0)1805/059595
Fax: +49-(0)9131/51683
www.clearaudio.de
[email protected]