Clearaudio UNIFY (Radial) - Handbuch (Seite 9)

Unify
User manual / Bedienungsanleitung
Seite/Page 9  clearaudio electronic GmbH 2014
4. Technical Data
Geometric data for tonearm versions of 9“ – 10” - 12“ – 14“
Optimized for recorded groove radiuses of outer 146.05 mm to inner 80 mm!
Zero touch point of the miss angle at the Radiuses 130.3 mm and 85.7 mm
Effective Tonearm length = axis - distance + overhang
Procedure during installation:
1. Axis distance check or adjustments
2. Installation of the overhang
3. Use one of the zero touch points, to adjust the cartridge on the record centre point.
4. Skating force including modulation of a radius of 133 mm or 83.9 mm, through anti-skating to
be compensated.
Unify Model: 9 inch 10 inch 12 inch 14 inch
Effective Tonearm Mass: 9g
10g 12 g
12.7 g 9g
Cartridge balance range: 2.5g – 17g 2.5g – 17g 2.5g – 17g 2.5g – 17g 2,5g – 17g
Vertical tracking force (at min.
cartridge weight): 3g 3g 3g 3g 3g
Äußerer: 119.5
Null points: Inner: 66,04
Outer: 120,9 Inner: 66,04
Outer: 120,9 Inner: 66,04
Outer: 120,9 Inner: 66,04
Outer: 120,9 Inner: 63,6
Outer: 119,5
Audio lead: 1,20 meter Clearaudio Superwire cable or RCA Junction box,
both fitted with Clearaudio MPC connectors 1 meter clearaudio Sixstream cable or RCA Junction box, both fitted with
clearaudio MPC connectors
Overhang: 17,3 mm 15,48 mm 12,9 mm 12,4 mm 17,5 mm
Overall length:
Effective Tone arm length: 300 mm
9,4 inches
(exact 239,3 mm) 335 mm
10 inches
(exact 265,45 mm) 390 mm
12,5 inches
(exact 316,9 mm) 420 mm
13,4 inches
(exact 339,4 mm) 9 inches (exakt 238,5 mm)
12 inches (exakt 318 mm)
14 inches (exakt 355,1 mm)
Distance from pivot to spindle: 222mm
249,97 mm 304 mm 327 mm
Tilt angle:
Maximum of tilt angle
According to the radius:
middle skatingfactor at a
radius of 133 mm and 83,9 mm:
23,00°
0,123 °/cm
0,49
20,61°
0,109 °/cm
0,41 17,16°
0,089 °/cm
0,36
16,00°
0,083 °/cm
0,33
For 9 inches - 222mm
For 12 inches – 296mm
For 14 inches – 328mm
Warranty*: 2 years 2 years 2 years 2 years
* Only if the warranty card is filled out correctly and sent back to Clearaudio.
Clearaudio electronic is not responsible for typographical errors in descriptions. Technical specifications subject to change or
improvement without prior notice. Availability as long as stock lasts. Copies and imprints- also only in extracts – require written
conformation through Clearaudio electronic GmbH; Germany; clearaudio electronic GmbH 2014
Stand: August 2014