Clearaudio (MC) MOVING COIL V2 - Handbuch (Seite 7)

MC Cartridge – V2
MC Tonabnehmer – V2
Goldfinger Statement
User manual / Bedienungsanleitung
Page / Seite 7  clearaudio electronic GmbH 2014
Please note
Every new V2 generation Clearaudio MC cartridge consists of 8 very powerful
magnets, the Goldfinger Statement cartridge consists of 12 magnets (currently the
most powerful magnets available in this size), therefore use extreme care and not to
use any steel or magnetic parts near the cartridge, which may be attracted to it and
possibly damage the stylus or boron cantilever.
Before playing a record, please remove all dust and dirt from the record surface using a
quality cleaning device.
For the best results, a record cleaning machine should be used.
Ask your dealer for Clearaudio´s Matrix-cleaning machines. (e.g. Smart Matrix
Professional, Double Matrix Professional Sonic, cleaning both sides of LP-record at
once!)
Avoid
Always avoid storing your cartridge near any objects using electrical transformers and
motors, which may generate magnetic fields. Any demagnetisation contact will result
in a drop of output voltage and possible case of distortion or degradation.
Once again:
Keep cool and concentrated when adjusting the cartridge. As a music lover you should
have all adjustment accessories even if you think they are expensive or difficult to use.
Damaged music reproduction or cartridge fault will never reproduce the one we love:
music.
5. Delivered accessories

Four of the Clearaudio original GOLD MC cartridge plugs (only for MC
cartridges Stradivari, Titanium and Goldfinger (V2))

Precision metal screwdriver

Individual real time response curve according Clearaudio original test

Cartridge mounting screws and nuts

Clearaudio smart gauge , for the tracking force adjustment
Analogue accessories are available at: www.analogshop.de
6. Maintenance, Service and Warranty
1. Always keep the stylus tip clean. When dirt is allowed to build-up and records are
played with a dirty or clogged stylus, a " buzzing noise " can be heard.
Use a high quality cleaning brush or Clearaudio cleaning fluid to clean the stylus
tip. Be extremely careful and always brush only from the back to front.
2. When using a liquid e.g. from Clearaudio or other organic cleaner, always take
care not to spill any on the cartridge body.
3. Make sure the liquid will always contact only the stylus tip or boron cantilever.
4. If any service or repair on all Clearaudio products is necessary, please contact
your dealer / distributor or contact Clearaudio directly. We can inform you as
well about your nearest service location
.