Clearaudio BASIC - Handbuch (Seite 5)

English
Basic+, the improoved version of the legendary basic.
Even better and more expensive electronic components and parts, in the power supply as well as
in the phono area, improve the Basic+ very audible and its technical specs as well.
This new RIAA-MC/MM-preamplifier Basic+ has been developed for highest demands in analog
music reproduction.
Another special feature of this preamplifier is the automatic adjustment to any kind of connected
MC- respectively MM-cartridge load, which means, that the maximum capability is always achieved
without additional switches.
The Basic+ has no power-switch and should moreover be always connected with mains in order
to keep the ideal temperature for electronic parts inside.
- Setup -
In order to activate the MC- or MM-function of Basic+, simply use the switch on the bottom side.
After that the ground of the turntable/tonearm should be connected with the Basic+. Now you
can proceed with connecting the Basic+ with your MC/MM-cartridge and preamplifier. The very
last thing to do, is to connect the power supply with mains. For disconnecting please use instruc-
tions vice-versa.
- Attention -
Never cover or put anything on top of the Basic+, which could lead to overheating of electronic
parts.
If the unit is not in use for an extended period, switch it off at the rear panel.
© clearaudio electronic GmbH 2014 Seite / page 5