Clearaudio ACCU + (Upgrading for Phonostages) - Handbuch (Seite 6)

ACCU+ Power Supply
User manual / Bedienungsanleitung
6  Clearaudio electronic GmbH 2014
Now your phonostage is supplied with pure DC-voltage out of the accumulators and no
distortion out of the mains will effect your music reproduction.
The innovative circuit design of the “ ACCU+ Power Supply” realizes automatically that the
accumulators need to be charged. This is to protect the NiMH-accumulators against total
discharge.
To avoid a total discharge the “Accu+ power supply” needs to be connected
constantly with the power supply !
The LEDs „accu ready“ will not lighting any more in the „accu mode“ when the voltage has
reached the minimum value. Now the accumulators will be recharged.
After listening to music please set the central switch in the “charge” position.
Even in the ”charge mode” the „ACCU+ Power Supply“ decouples all distortions from the
mains supply, so that you can enjoy listening to the music.
3. Safety instructions

After finishing listening to music always switch the central button to the position
„charge“.
This ensures that you have always full charged accumulators, if you want to listen to
music.

Use the equipment only if you see no outside damages!

Store and use the device only at room temperature (approx. 20° Celsius)

To avoid total discharge the “
Accu+ power supply” has to be connected constantly on
the mains supply

Don’t recycle the equipment over the domestic refuse!
Clearaudio takes the equipment back free of charge.