Clearaudio APG (ACCURATE POWER GENERATOR) - Handbuch (Seite 5)

Accurate Power Generator
User Manual / Bedienungsanleitung
Page / Seite 4  clearaudio electronic GmbH 2012
- Service and special instruction -
In case of any necessary, service for all clearaudio products should be done by authorized personal
only.
In case of any repair, the clearaudio APG needs to be send to your nearest authorized clearaudio
distributor, dealer or directly to the clearaudio factory.
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)9131/40 300 100
www.clearaudio.de
www.analogshop.de
[email protected]
Send / ship the APG always and only in the original packing !
Only in the original packing clearaudio can provide the warranty.
To achieve the full clearaudio warranty, it is necessary that you fill out and send the
corresponding part of the warranty registration certificate /card back to clearaudio,
within two weeks after purchase.
- Technical specifications APG / English - :
Main voltage:
115 / 230 V – 50 / 60 Hz switchable on the
back panel
Fuse: at 115 V / T 2.5 A
at 230 V / T 1.25 A
Output voltage: 115 / 230 V switchable on the back panel
fine adjustment on the front side possible
Output frequency: infinitely variable approx. 46 – 92 Hz
Output power in operation: max. 75 Watt
Output power non-operating state: 0 Watt (if both switches are in “OFF” position)
Input: Fused IEC power socket including main switch
Output: Three IEC power socket
Dimensions (approx: H x W x D in inch): 4.5 x 4.1 x 11
Dimensions (approx: H x W x D in mm): 115 x 105 x 280
Weight (only APG) : 5.1 kg