SUNBOUNCE WIND-KILLER-PRO - Handbuch

WIND-KILLER PRO
Aufbauanleitung
Operating Instructions
4. Ensure that the end of the pole protrudes beyond the end of the sleeve.
5. This will give you enough room to guide the pole into the fabric pocket at the other end of
the screen.
6. Now pull the closed corners of the pockets over the pole ends such that the screen is taut.
Repeat with the other side of the screen.
7. Next insert the crossbar in the T-connector.
8. Hold each crossbar firmly and pull the long pole towards yourself. Insert the crossbar in the
second T-connector. The WIND-KILLER is ready to go!
Stand 2012/03/14
SUNBOUNCE.COM
SUNBOUNCE GmbH · Buchenring 8 - 10 · 21272 Egestorf · Germany
Telefon: +49 (0) 4175 - 80 88 79 87 · Telefax: +49 (0) 4175 - 80 88 79 67
E-Mail: [email protected] · Internet: www.sunbounce.com
© 2013 SUNBOUNCE GmbH. All rights reserved.