13 technical data, 1 mechanical data, Technical data – Baumer HS35 Benutzerhandbuch
Seite 39: Mechanical data
Technical data
Baumer_HS35_II_DE-EN_1409.pdf
39
13
Technical data
13.1
Mechanical data
Size (flange)
ш3.15" (ш80 mm)
Shaft
ш0.375...1" (ш9.525...25.4 mm)
through hollow shaft isolated
Bore runout
0.0016" (0.04 mm) TIR max.
Admitted misalignment
0.004" (0.1016 mm) radial TIR (end of shaft)
0.01" (0.254 mm) axial
Protection DIN EN 60529 IP 54, IP 65, IP 67
Operating speed
≤5000 rpm (see temperature diagram on page 43)
Bearing
52100 SAE high carbon steel (ABEC 5)
Starting torque
≤3 in-oz (77 °F, IP 65)
≤0.02 Nm (+25 °C, IP 65)
Rotor moment of inertia 2.3 oz-in² (420 gcm²)
Service life
Bearing: typ. 13 billion rev.
(89000 h / 2500 rpm)
Materials
Housing: aluminium, powder-coated
Shaft: stainless steel
Operating temperature
-40...+212 °F (-40...+100 °C) (fixed cable): see
temperature diagram on page 43
Relative humidity
98 % non-condensing
Resistance
DIN EN 60068-2-6
Vibration 20 g, 55-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Connection
MIL-connector, 7-pin (not for HS35S)
MIL-connector, 10-pin
Cable (AWG26 wire)
Weight approx.
23 oz., 660 g