Pilz PSEN op Lens Shield-2-050 - Handbuch (Seite 6)

EN
1002402-2EN-01
PSEN op LensShield
Operating instructions
2 Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected] Original document
Assembly
Build the subassembly as shown in Figs. 1 and 2, but do not
completely tighten the screw on the slot nut , leaving space
between parts and (see Fig. 2).
Fig. 1 Fig. 2
Insert the subassembly into the groove on the PILZ product (PSEN
op series) as shown in Fig. 3, to achieve the status as shown in Fig.
4. The optimum position of the slot nuts on the light grid can be
taken from the Lo value in the table listed under Dimensions.
Fig. 3 Fig. 4
Leave
space