Soundmatters DASH7 - Handbuch (Seite 5)

ENGLISH 5
Wireless Hands-free Calls
1. Pick Up Call: Press POWER/BLUETOOTH button.
2. End or Reject Call: Momentarily press then release the POWER/BLUETOOTH
button.
3. Transfer Call during a call: press POWER/BLUETOOTH button for 2 seconds
then release to transfer call back to phone (i.e. for privacy).
Optional Subwoofer
With DASH’s subwoofer output you can easily add the Soundmatters
palm-sized foxLO, or a larger good-quality powered hi-fi subwoofer.
NOTE: If your subwoofer connects with an RCA, typically use the RIGHT/Red
input only (refer to sub manual), and use an RCA to 3.5mm adapter to connect
to DASH.
Auto Power Off (to prevent battery drain)
1. Press VOL+ and VOL– together until LED flashes twice to switch between
enabled and disabled.
2. LED flashes green to indicate Auto Power Off is enabled
and flashes red to indicate it is disabled.
NOTE: Auto Power Off is available ONLY when battery-powered in Bluetooth
mode. Auto Power Off engages when Bluetooth is idle more than 5 minutes. It
does NOT work in wired audio mode with the 3.5 mm phone jack plugged‐in.
Clear Bluetooth Memory (after 8 devices):
1. DASH can store up to 8 devices as paired in its memory. After that you need to
clear the memory to pair new devices.
2. While connected to the external power adapter, press VOL+, VOL– and
Bluetooth/Power buttons simultaneously for >1 second.
NOTE: We suggest you use one hand to press the VOL+ and VOL– first, then with
the other hand press the Power button to avoid shutting off power accidentally.