AUDIOLINE Power PMR 46 - Handbuch (Seite 32)

Operating the Walkie-Talkies
12
Scanning channels
When the Scan function is turned on, the handset will continuously scan
through all eight channels until it finds one on which another user is trans-
mitting.
5 x Press the menu key 5 times.
/ Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
/ Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning
mode.
Scanning subchannels (CTCSS)
With this function activated the handset will continuously scan through all
subchannels (CTCSS) for the preset channel until it finds one on which
another user is transmitting.
6 x Press the menu key 6 times.
/ Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
/ Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning
mode.
Scanning DCS
With this function activated the handset will continuously scan through all
DCS channels for the preset channel until it finds one on which another
user is transmitting.
7 x Press the menu key 7 times.
/ Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
PMR 46 GB_041212_dtp 04.12.12 12:33 Seite 12